Discourse/Uncategorized/2020-06-20 Solar Powered WiFi Weather Station -- diy project

📜 Discourse Archive This page is preserved verbatim from discuss.noisebridge.info, the Noisebridge community forum that operated roughly 2018–2022. The original site is defunct; this content was recovered via the Wayback Machine and is archived here as a primary source for Noisebridge history. ⮡ Original URL: https://discuss.noisebridge.info/t/solar-powered-wifi-weather-station-diy-project/1860 📦 Verify on Wayback Machine 📅 Archived: 2022-05-19 🏷 Original category: Uncategorized

Solar Powered WiFi Weather Station -- diy project

---

James — 2020-06-20

Available as a kit for $30 or just the PCB for $5.

18650 battery runs $10 - $15 for either 2600mA or 3600 mA.

- Basic kit measure barometric preasure, temperature and humidity, plus supports 5 additional sensors.

- Supports Arduino code and automation tools such as Home Assistant and all of the other options out there.

- Instructables link for the complete project.

- You must 3D Print your own case – using these Thingiverse STL files.

- Can be expanded to monitor wind speeds with these $70 Wind Meters from Sparkfun for measuring wind speed, direction, and rainfall levels.

- I ordered an extra kit for Noisebridge or Sudoroom.

 [https://www.youtube.com/watch?v=RlrXk40D-pc 
   
 ]

---