Discourse/Projects/2021-01-13 Looking to 3D print a Weather Station case

From Noisebridge
Jump to navigation Jump to search

📜 Discourse Archive
This page is preserved verbatim from discuss.noisebridge.info, the Noisebridge community forum that operated roughly 2018–2022. The original site is defunct; this content was recovered via the Wayback Machine and is archived here as a primary source for Noisebridge history.
⮡ Original URL: https://discuss.noisebridge.info/t/looking-to-3d-print-a-weather-station-case/2261
📦 Verify on Wayback Machine
📅 Archived: 2021-01-18
🏷 Original category: Projects

Looking to 3D print a Weather Station case[edit | edit source]

James — 2021-01-13

Continuing the discussion from Solar Powered WiFi Weather Station – diy project:

I’d like to 3D Print this weather station case to gift to a friend (and possibly build a second for Noisebridge). I have no experience with 3D Printing, so assistance appreciated! Seeking access to a 3D Printer if possible.

I do have a spare weather station kit for Noisebridge if we want to print two cases.

Any thoughts and suggestions appreciated!


David — 2021-01-13

I can print it for you this week. I dont have that many PLA filaments tho. I have glow in the dark and orange.


David — 2021-01-13

Oh yeah I also have some clearish PETG. Im not great at printing it but it works


themanmaran — 2021-01-14

I’d say glow in the dark is probably the best alternative here lol

Retrieved from "https://wiki.extremist.software/index.php?title=Discourse/Projects/2021-01-13_Looking_to_3D_print_a_Weather_Station_case&oldid=89177"