Maker Faire Build Night 2015-02-26

From Noisebridge
Revision as of 22:17, 2 March 2015 by Jarrod (talk | contribs) (Created page with "This is part of the Noisebridge Booth for Maker Fair 2015 project The project continues. We started with the task of gathering a couple test materials ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is part of the Noisebridge Booth for Maker Fair 2015 project

The project continues.

We started with the task of gathering a couple test materials and building our test pieces for the table top.

resin, spray adhesive, stir sticks, gloves, cups, pigment

TAP Plastics recommended Ultra-Glo resin for this project. Apparently this resin can also be used to finish the wood on the table so we can go right over the resin and wood together to give the final table top a smooth flush surface. The finished table based on the design so far will end up needed about 110 oz of resing to make the Noisebridge logo.

Retrieved from "https://wiki.extremist.software/index.php?title=Maker_Faire_Build_Night_2015-02-26&oldid=46912"