3D Printing: Difference between revisions

Revision as of 00:29, 24 November 2015

Our Makerbot printers all died and Replicator Wednesdays are on hiatus.

Works, a clone of a MakerBot Replicator Dual Extruder.

this is the wood frame product, similar to the Creator Pro model made of plastic.

Connecting
- Connection error: The serial port named '/dev/tty.usbmodem1411' could not be found.
  - It may not be turned on and plugged in.

A Threed printer computer station connected to it

Many colors of filament spools to use for printing projects.

Getting the Flashforge Creator printing: http://goo.gl/3mwCkk

If you are interested in organizing a new regular 3D printing meetup or reviving Replicator Wednesdays, do it!

There is an outdated 3DPrintBeginners guide page that could be a source of good material for this updated new page.

Let User:Lxpk know and he will assist with updating the wiki and organizing your event or project.

@@ Line 17: / Line 17: @@
 === Printing ===
-* You need FTDI drivers installed: [http://www.ftdichip.com/Drivers/VCP.htm FTDI Driver Download]
+# You need FTDI drivers installed: [http://www.ftdichip.com/Drivers/VCP.htm FTDI Driver Download]
-* You need [http://replicat.org/download ReplicatorG]
+# You need [http://replicat.org/download ReplicatorG]
-* In ReplicatorG, the machine driver to select is Replicator Dual.
+# In ReplicatorG, the machine driver to select is Replicator Dual.
-* Generate GCode from your STL file.
+# Generate GCode from your STL file.
-* Click Connect to device.
+# Click Connect to device.
+===Troubleshooting===
+# Connecting
+#* Connection error: The serial port named '/dev/tty.usbmodem1411' could not be found.
+#** It may not be turned on and plugged in.
 A [[Threed]] printer computer station connected to it