Doorbell: Difference between revisions
Jump to navigation
Jump to search
m (→Doorbell 2.0) |
m (→Doorbell 2.0) |
||
| Line 7: | Line 7: | ||
Troubleshooting | Troubleshooting | ||
* Check to ensure the speaker is connected to the green terminals of the arduino, and the audio cable is plugged into the intercom box by the top door. | |||
* Hit the reset key on the Arduino | * Hit the reset key on the Arduino | ||
* Re-upload or modify the Arduino sketch | * Re-upload or modify the Arduino sketch | ||
Revision as of 20:51, 1 August 2013
Doorbell 2.0
Arduino-based, includes lights and a customizable tone.
Troubleshooting
* Check to ensure the speaker is connected to the green terminals of the arduino, and the audio cable is plugged into the intercom box by the top door. * Hit the reset key on the Arduino * Re-upload or modify the Arduino sketch
Some arduino code (Improvements & ethernet functionality coming soon!)
If this fails you can revert to doorbell 1.0.
Doorbell 1.0
Via original intercom box.
Fallback instructions.
Go to the intercom box by the top door:
* Ensure the buzzer switch on the top is set to 'On' * Unplug the audio cable from the side of the intercom box by the door.
Doorbell 1.0 functionality should work