Doorbell: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Doorbell 2.0) |
||
| Line 8: | Line 8: | ||
* Hit the reset key on the Arduino | * Hit the reset key on the Arduino | ||
* | * Re-upload or modify the Arduino sketch | ||
Some [https://github.com/danasf/noise-/tree/master/doorbell arduino code] (Improvements & ethernet functionality coming soon!) | Some [https://github.com/danasf/noise-/tree/master/doorbell arduino code] (Improvements & ethernet functionality coming soon!) | ||
Revision as of 20:50, 1 August 2013
Doorbell 2.0
Arduino-based, includes lights and a customizable tone.
Troubleshooting
* Hit the reset key on the Arduino * Re-upload or modify the Arduino sketch
Some arduino code (Improvements & ethernet functionality coming soon!)
If this fails you can revert to doorbell 1.0.
Doorbell 1.0
Via original intercom box.
Fallback instructions.
Go to the intercom box by the top door:
* Ensure the buzzer switch on the top is set to 'On' * Unplug the audio cable from the side of the intercom box by the door.
Doorbell 1.0 functionality should work