Noisebridge - User contributions [en]

Wood Shop

2017-05-06T00:32:29Z

Urriellu:

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.
[[File:Shop.jpg|thumb|right|Lathe, drill press and others]]

A wish-list for the shop is posted on [[Dirty Shop Wish List]]
==Tools==

* [[Table Saw]] (Black & Decker BT2500)
* [[Lathe]] (7"x12" Cummins)
** Check http://www.mini-lathe.com/ for great info
* Milling Machines
** [[Manual_Mill | Manual Mill]] (JET JET-15 Mill / Drill)
** [[MaxNCMill | CNC Mill (MaxNC 10)]]
** Quick Circuit 5000
** [[Othermill]]
** [[Roland_MDX-40a | CNC Mill (Roland MDX-40a)]]
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
* [[Bench grinder]] (Ryobi 6")
* [[Disk sander]] (Delta 31-120 12")
* [[Drill press]] (Ryobi RDP1850)
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
* Assorted hand tools
** Hacksaws
** Drill
** [[Heat gun]]
* Assorted screws, bolts, etc

==Other Noisebridge Tools==
* [[Lasercutter | Laser cutter]]
* [[3D printers]]

==Safety==

'''A note regarding cutting metal in stationary tools:'''

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Resources

2017-05-06T00:31:44Z

Urriellu:

Noisebridge contains several resources that are at the [[Getting Here|physical space]] and in virtual space. These are available to both members and the general public.

=== Project Spaces and Resources ===
* [[Electronics Lab]]
* [[Library]]
* [[Craft Lab]]
* [[Sewing| Sewing Machines]]
* [[Shop|Dirty shop]]
* [[Anodization Equipment]]

=== Fabrication ===
* [https://www.noisebridge.net/mailman/listinfo/fab Fab mailing list] - All things related to fab tools at Noisebridge, laser cutter, Makerbot, RepRap, CNC mill
* [[Lasercutter| Laser Cutter]]
* [[3D Printing]]
* [[RepRap]]
* Milling Machines
** [[Manual_Mill | Manual Mill]] (JET JET-15 Mill / Drill)
** [[MaxNCMill | CNC Mill (MaxNC 10)]]
** Quick Circuit 5000
** [[Othermill]]
** [[Roland_MDX-40a | CNC Mill (Roland MDX-40a)]]
* [[Vinyl cutter]]

[[File:3DPrinters100dpi.fw.png|200px|link=3dprint]]
[[File:GamebridgeSignPage.fw.png|200px|link=gamebridge]]

=== Computer Servers ===
* [[Tor|Our Tor server]]
* [[Ratchet]], a VPS that houses a bunch of production services like the donation site, library app etc...
* [[Pegasus]], houses a PCI card for interfacing with the payphones and a database-backed list of [[Electronic Parts]] at the space
* [[Sandstorm]], a [https://www.sandstorm.io Sandstorm] install at https://noisebridge.sandcats.io
* <del>[[Noisebridge-Greet]], our general public internet terminal</del>
* <del>[[Pony]], a legendary login and file server</del>
* <del>[[Zebra]], a display unit for the [[Reverse Engineering Bar]]</del>
* <del>[[Donkey]], former display unit for the REBar, now asking to be used</del>
* <del>[[s1]], a server for production services related to the space</del>
* <del>[[Quagga]], a development and general use kiosk in the electronics lab</del>
* <del>[[Kiang]], a kiosk/? system built into a tabletop with a touchscreen</del>
* <del>[[Janky]], a janky system, made from whatever was available.</del>
* <del>[[Horsy]], where the audiovisual stuff lives</del>

=== Physical Infrastructure ===
* [[Network]]
* [[Touch_Panels|Touch Panels]]
* [[Telephony|Voice over IP / Telephony]]
* [[Electrical_Map|Electrical Map]]
* [[Elevator]]
* [[Plumbing]]
* [[AV]]

=== Access Control ===
* [[Door Keys]]
* [[Access System|Electronic door lock]]
* [[Noisedoor]]

=== Bulk Orders ===
* [[Digikey Bulk Order|Digikey Bulk Order]]
* [[McMaster Bulk Order|McMaster Bulk Order]]
* [[Mega Arduino Order|Mega Arduino Order]]
* [[Adafruit Bulk Order]]

=== Facilities ===

* [[House Keeping]]
* [[2169 Utilities]]

=== Sources for project components ===
* [[Sources for electronic and other project components|External resources]]

[[Category:InTheSpace]]

Roland MDX-40a

2017-05-06T00:20:53Z

Urriellu:

This CNC Milling machine is not set up yet. It is being prepared by [[Urriellu|Adrian B]]. Please contact me if you need help.

[[File:Roland_MDX-40_large.jpg]]
==Features==
* Maximum cuttable material
** 123mm = 4.84in high
** 305x305mm = 12x12in wide
** 4kg = 8.8lb
* Operating speed
** XY-axis : 7 to 3000 mm/min. (0.28 to 118 in./m)
** Z-axis : 7 to 1800 mm/min. (0.28 to 70.8 in./m)
** 2 mm/min step for 7 to 60 mm/min(0.28 to 2.36 in./m)
** 60 mm/min step for 60 to 3000 mm/min(2.36 to 118 in./m).
* Software resolution
** 0.01 mm/step (0.00039 in./step) (RML-1),
** 0.001 mm/step (0.000039 in./step) (NC code)
* Mechanical resolution
** 0.002 mm/step (0.000078 in./step) (micro-step control)
* Spindle rotation
** 4,500 to 15,000 rpm
* Control command sets
** RML-1
** NC code
* Power consumption
** Approx. 210 W
* External dimensions
** Width x depth x height : 669 x 760 x 554 mm (26.4 x 30 x 21.9 in.)
* Weight
** 65 kg

==Base==
* Dimensions: 305x305x10mm
** See [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf User’s Manual page 93]

==Collets==
* <del>3mm, ZC-23-3 $39.99</del> (we don’t have it)
* ⅛" (3.175mm) ZC-23-3175 PNC-2300A $39.99
* ~15/64" = 3.75/16" (6mm) ZC-23-6 $39.99
* ¼" (6.35mm) ZC-23-635 $35.99

==Mill bits==
* Roughing/Drafting & 2D cutting
** '''Flat end mill GMHT14F5''' [https://www.amazon.com/CGC-Tools-GMHT14F5-Ultra-High-Performance/dp/B00NABVDRK $7.98] 5 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL
** Flat end mill 1/8" (taken from another CNC)
* Finishing / Detailing
** '''Ball Nose End Mill 1/8"''' (taken from another CNC)

==Spanners==
* 10mm
* 17mm

==Hex allen keys==
* 2mm

==Materials==
===Allowed===
* Soft woods
* (maybe?) hard woods
* Resins

==='''Forbidden'''===
* '''ANY METAL IS FORBIDDEN'''
* Aluminum
* Steel

==Links==
* [https://www.rolanddga.com/products/3d/mdx-40a-benchtop-cnc-mill/accessories Roland MDX-40a Accessories]
* [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf Roland MDX-40a User’s Manual]

File:Roland MDX-40 large.jpg

2017-05-06T00:20:25Z

Urriellu:

Roland MDX-40a

2017-05-02T22:46:35Z

Urriellu:

This CNC Milling machine is not set up yet. It is being prepared by [[Urriellu|Adrian B]]. Please contact me if you need help.

==Features==
* Maximum cuttable material
** 123mm = 4.84in high
** 305x305mm = 12x12in wide
** 4kg = 8.8lb
* Operating speed
** XY-axis : 7 to 3000 mm/min. (0.28 to 118 in./m)
** Z-axis : 7 to 1800 mm/min. (0.28 to 70.8 in./m)
** 2 mm/min step for 7 to 60 mm/min(0.28 to 2.36 in./m)
** 60 mm/min step for 60 to 3000 mm/min(2.36 to 118 in./m).
* Software resolution
** 0.01 mm/step (0.00039 in./step) (RML-1),
** 0.001 mm/step (0.000039 in./step) (NC code)
* Mechanical resolution
** 0.002 mm/step (0.000078 in./step) (micro-step control)
* Spindle rotation
** 4,500 to 15,000 rpm
* Control command sets
** RML-1
** NC code
* Power consumption
** Approx. 210 W
* External dimensions
** Width x depth x height : 669 x 760 x 554 mm (26.4 x 30 x 21.9 in.)
* Weight
** 65 kg

==Base==
* Dimensions: 305x305x10mm
** See [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf User’s Manual page 93]

==Collets==
* <del>3mm, ZC-23-3 $39.99</del> (we don’t have it)
* ⅛" (3.175mm) ZC-23-3175 PNC-2300A $39.99
* ~15/64" = 3.75/16" (6mm) ZC-23-6 $39.99
* ¼" (6.35mm) ZC-23-635 $35.99

==Mill bits==
* Roughing/Drafting & 2D cutting
** '''Flat end mill GMHT14F5''' [https://www.amazon.com/CGC-Tools-GMHT14F5-Ultra-High-Performance/dp/B00NABVDRK $7.98] 5 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL
** Flat end mill 1/8" (taken from another CNC)
* Finishing / Detailing
** '''Ball Nose End Mill 1/8"''' (taken from another CNC)

==Spanners==
* 10mm
* 17mm

==Hex allen keys==
* 2mm

==Materials==
===Allowed===
* Soft woods
* (maybe?) hard woods
* Resins

==='''Forbidden'''===
* '''ANY METAL IS FORBIDDEN'''
* Aluminum
* Steel

==Links==
* [https://www.rolanddga.com/products/3d/mdx-40a-benchtop-cnc-mill/accessories Roland MDX-40a Accessories]
* [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf Roland MDX-40a User’s Manual]

Template:Color

2017-05-02T22:44:31Z

Urriellu:

Template:Pp-template

2017-05-02T22:44:13Z

Urriellu: Created page with "<includeonly>{{#invoke:Protection banner|main}}</includeonly><noinclude> {{documentation}}  </noinclude>"

<includeonly>{{#invoke:Protection banner|main}}</includeonly><noinclude>
{{documentation}}

</noinclude>

Template:Documentation/start box

2017-05-02T22:43:55Z

Urriellu: Created page with "<div id="template-documentation" class="template-documentation iezoomfix">{{#ifeq: {{{hea..."

<div id="template-documentation" class="template-documentation iezoomfix">{{#ifeq: {{{heading|¬}}} | 
| 
| <div style="padding-bottom: 3px; border-bottom: 1px solid #aaa; margin-bottom: 1ex;"><span style="{{#if: {{{heading-style|}}}
| {{{heading-style|}}}
| {{#ifeq: {{SUBJECTSPACE}} | {{ns:Template}}
| font-weight: bold; font-size: 125%
| font-size: 150%
}}
}}">{{#switch: {{{heading|¬}}}
| ¬ =

{{#switch: {{SUBJECTSPACE}}
| {{ns:Template}} = [[File:Template-info.png|50px|link=|alt=Documentation icon]] {{{Documentation alt text|Template documentation}}}
| {{ns:Module}} = [[File:Template-info.png|50px|link=|alt=Documentation icon]] Module documentation
| {{ns:File}} = Summary
| #default = Documentation
}}
| #default =

{{{heading|}}}
}}</span>{{
#if: {{{content|}}}
|
| 
<span class="mw-editsection plainlinks" id="doc_editlinks">{{
#if: {{{doc exist|yes}}}
| [[[{{{docpage|{{FULLPAGENAME}}/doc}}}|view]]] [[{{fullurl:{{{docpage|{{FULLPAGENAME}}/doc}}}|action=edit}} edit]] [[{{fullurl:{{{docpage|{{FULLPAGENAME}}/doc}}}|action=history}} history]] [{{purge|purge}}]
| 
[[{{fullurl:{{{docpage|{{FULLPAGENAME}}/doc}}}| action=edit&preload={{
#if: {{{preload|}}}
| {{urlencode:{{{preload}}}}}
| {{#ifeq: {{SUBJECTSPACE}} | {{ns:File}}
| Template:Documentation/preload-filespace
| Template:Documentation/preload
}} }} }} create]]
}}</span>
}}</div>
}}<noinclude></div>

{{pp-template}}

</noinclude>

Template:Fmbox

2017-05-02T22:43:37Z

Urriellu: Created page with "{{#invoke:Message box|fmbox}}<noinclude> {{documentation}}  </noinclude>"

{{#invoke:Message box|fmbox}}<noinclude>
{{documentation}}

</noinclude>

Template:Documentation/end box

2017-05-02T22:43:18Z

Urriellu: Created page with "{{#if:  {{#ifeq: {{{link box|}}} | off | | {{{doc exist|yes}}}{{ #switc..."

{{#if:

{{#ifeq: {{{link box|}}} | off
|
| {{{doc exist|yes}}}{{
#switch: {{SUBJECTSPACE}}
| {{ns:User}}
| {{ns:Module}}
| {{ns:Template}} = yes
}}
}}

| {{fmbox
| id = documentation-meta-data
| image = none
| style = background-color: #ecfcf4;
| textstyle = font-style: italic;
| text =
{{#if: {{{link box|}}}
| {{{link box}}} 
| {{#if: {{{doc exist|yes}}}
| 
The above [[Wikipedia:Template documentation|documentation]] is [[Wikipedia:Transclusion|transcluded]] from [[{{{docpage|{{FULLPAGENAME}}/doc}}}]]. <small style="font-style: normal">([{{fullurl:{{{docpage|{{FULLPAGENAME}}/doc}}}|action=edit}} edit] | [{{fullurl:{{{docpage|{{FULLPAGENAME}}/doc}}}|action=history}} history])</small> <br />
|{{#switch: {{SUBJECTSPACE}}
| {{ns:Module}} = You might want to [{{fullurl: {{{docpage| {{FULLPAGENAME}}/doc }}} | action=edit&preload=Template:Documentation/preload-module-doc }} create] a documentation page for this [[Wikipedia:Lua|Scribunto module]]<br>
| #default =
}}
}}{{#switch: {{SUBJECTSPACE}}
| {{ns:User}}
| {{ns:Module}}
| {{ns:Template}} =
Editors can experiment in this {{#switch: {{SUBJECTSPACE}} | {{ns:module}} = module's | #default = template's}} {{
#ifexist: {{{sandbox| {{FULLPAGENAME}}/sandbox }}}
| [[{{{sandbox| {{FULLPAGENAME}}/sandbox }}}|sandbox]] <small style="font-style: normal">([{{fullurl: {{{sandbox| {{FULLPAGENAME}}/sandbox }}} | action=edit }} edit] <nowiki>|</nowiki> [{{fullurl:Special:ComparePages | page1={{urlencode:{{{template page|{{FULLPAGENAME}}}}}}}&page2={{urlencode:{{{sandbox|{{FULLPAGENAME}}/sandbox}}}}}}} diff])</small>
| sandbox <small style="font-style: normal">([{{fullurl: {{{sandbox| {{FULLPAGENAME}}/sandbox }}} | action=edit&preload=Template:Documentation/preload-{{#ifeq: {{SUBJECTSPACE}}|{{ns:Module}}|module-}}sandbox }} create] <nowiki>|</nowiki> [{{fullurl: {{{sandbox| {{FULLPAGENAME}}/sandbox }}} | action=edit&preload={{urlencode:{{{template page|{{FULLPAGENAME}}}}}}}&summary={{urlencode:Create sandbox version of [[{{{template page|{{FULLPAGENAME}}}}}]]}} }} mirror])</small>
}} and {{
#ifexist: {{{testcases| {{FULLPAGENAME}}/testcases }}}
| [[{{{testcases| {{FULLPAGENAME}}/testcases }}}|testcases]] <small style="font-style: normal">([{{fullurl: {{{testcases| {{FULLPAGENAME}}/testcases }}} | action=edit }} edit])</small>
| testcases <small style="font-style: normal">([{{fullurl: {{{testcases| {{FULLPAGENAME}}/testcases }}} | action=edit&preload=Template:Documentation/preload-{{#ifeq: {{SUBJECTSPACE}}|{{ns:Module}}|module-}}testcases&summary={{urlencode:Create testcases page for [[{{{template page|{{FULLPAGENAME}}}}}]]}} }} create])</small>
}} pages. <br />
}}{{#if: {{{content|}}} {{{docname fed|}}}
|
| Please add categories to the [[{{{docpage|{{FULLPAGENAME}}/doc}}}|/doc]] subpage.
}}{{#switch: {{SUBJECTSPACE}}
| {{ns:File}} = 
| {{ns:Module}} =  [[Special:PrefixIndex/{{{template page|{{FULLPAGENAME}}}}}/|Subpages of this module]].
| {{ns:Template}} =  [[Special:PrefixIndex/{{{template page|{{FULLPAGENAME}}}}}/|Subpages of this template]].
| #default =  [[Special:PrefixIndex/{{{template page|{{FULLPAGENAME}}}}}/|Subpages of this page]].
}}
}}{{#ifexist:{{FULLPAGENAME}}/Print
|<br />A [[Help:Books/for experts#Improving the book layout|print version]] of this template exists at [[/Print]]. If you make a change to this template, please update the print version as well.[[Category:Templates with print versions]]
}}
}}
}}{{#if:


{{#switch: {{SUBPAGENAME}}
| doc
| testcases = strange
}}


| <includeonly>[[Category:Wikipedia pages with strange ((documentation)) usage|{{main other|Main:}}{{FULLPAGENAME}}]]</includeonly>

}}

Template:Documentation/end box2

2017-05-02T22:43:04Z

Urriellu: Created page with "<noinclude><div></noinclude><div style="clear: both;"></div> </div><!-- Link..."

<noinclude><div></noinclude><div style="clear: both;"></div>
</div>{{documentation/end box
| preload = {{{preload|}}} 
| content = {{{content|}}}
| link box = {{{link box|}}} 

| docpage =
{{#if: {{{1|}}}
| {{{1|}}}
| {{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/doc
}}
| doc exist =
{{#ifexist:
{{#if: {{{1|}}}
| {{{1|}}} 
| {{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/doc
}}
| yes
}}
| docname fed =
{{#if: {{{1|}}}
| yes
}}

| sandbox =
{{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/sandbox
| testcases =
{{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/testcases

| template page =
{{NAMESPACE}}:{{{template page|{{PAGENAME}}}}}

}}<noinclude>

</noinclude>

Template:Documentation/start box2

2017-05-02T22:42:47Z

Urriellu: Created page with "{{documentation/start box | preload = {{{preload|}}}  | heading = {{{heading|¬}}}  | heading-style = {..."

{{documentation/start box
| preload = {{{preload|}}} 
| heading = {{{heading|¬}}} 
| heading-style = {{{heading-style|}}}
| content = {{{content|}}}

| docpage =
{{#if: {{{1|}}}
| {{{1|}}}
| {{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/doc
}}

| doc exist =
{{#ifexist:
{{#if: {{{1|}}}
| {{{1|}}} 
| {{{docspace|{{NAMESPACE}}}}}:{{{template page|{{PAGENAME}}}}}/doc
}}
| yes
}}

}}<noinclude>


</noinclude>

Template:Template other

2017-05-02T22:42:16Z

Urriellu: Created page with "{{#switch:  {{#if:{{{demospace|}}} | {{lc: {{{demospace}}} }}  | {..."

{{#switch:

{{#if:{{{demospace|}}}
| {{lc: {{{demospace}}} }} 
| {{#ifeq:{{NAMESPACE}}|{{ns:Template}}
| template
| other
}}
}}
| template = {{{1|}}}
| other
| #default = {{{2|}}}
}}<noinclude>

{{documentation}}

</noinclude>

Template:Color

2017-05-02T22:41:12Z

Urriellu: Created page with "<span style="color:{{{1|}}}">{{{2|{{{1|}}}}}}</span><noinclude>{{Documentation}}</noin..."

<span style="color:{{{1|}}}">{{{2|{{{1|}}}}}}</span><noinclude>{{Documentation}}</noinclude>

Adrian B.

2017-05-02T22:38:22Z

Urriellu: Redirected page to Urriellu

#REDIRECT [[Urriellu]]

Adrian B

2017-05-02T22:38:03Z

Urriellu: Redirected page to Urriellu

#REDIRECT [[Urriellu]]

Urriellu

2017-05-02T22:37:16Z

Urriellu: Created page with "Urriellu, also known Adrian B. Embedded Systems Engineer. Regular user of milling machines and other tools for wood and plastic. Setting up the Roland MDX-40a CNC Milling M..."

Urriellu, also known Adrian B.

Embedded Systems Engineer.

Regular user of milling machines and other tools for wood and plastic.

Setting up the Roland MDX-40a CNC Milling Machine for Noisebridge.

Contact: [[File:Urrmail.png]]

File:Urrmail.png

2017-05-02T22:35:32Z

Urriellu: image to avoid spam

image to avoid spam

Resources

2017-05-02T19:06:46Z

Urriellu:

Noisebridge contains several resources that are at the [[Getting Here|physical space]] and in virtual space. These are available to both members and the general public.

=== Project Spaces and Resources ===
* [[Electronics Lab]]
* [[Library]]
* [[Craft Lab]]
* [[Sewing| Sewing Machines]]
* [[Shop|Dirty shop]]
* [[Anodization Equipment]]

=== Fabrication ===
* [https://www.noisebridge.net/mailman/listinfo/fab Fab mailing list] - All things related to fab tools at Noisebridge, laser cutter, Makerbot, RepRap, CNC mill
* [[Lasercutter| Laser Cutter]]
* [[3D Printing]]
* [[RepRap]]
* Milling Machines
** [[Manual_Mill | Manual Mill]] (JET JET-15 Mill / Drill)
** [[MaxNCMill | CNC Mill (MaxNC 10)]]
** [[Roland_MDX-40a | CNC Mill (Roland MDX-40a)]]
* [[Vinyl cutter]]

[[File:3DPrinters100dpi.fw.png|200px|link=3dprint]]
[[File:GamebridgeSignPage.fw.png|200px|link=gamebridge]]

=== Computer Servers ===
* [[Tor|Our Tor server]]
* [[Ratchet]], a VPS that houses a bunch of production services like the donation site, library app etc...
* [[Pegasus]], houses a PCI card for interfacing with the payphones and a database-backed list of [[Electronic Parts]] at the space
* [[Sandstorm]], a [https://www.sandstorm.io Sandstorm] install at https://noisebridge.sandcats.io
* <del>[[Noisebridge-Greet]], our general public internet terminal</del>
* <del>[[Pony]], a legendary login and file server</del>
* <del>[[Zebra]], a display unit for the [[Reverse Engineering Bar]]</del>
* <del>[[Donkey]], former display unit for the REBar, now asking to be used</del>
* <del>[[s1]], a server for production services related to the space</del>
* <del>[[Quagga]], a development and general use kiosk in the electronics lab</del>
* <del>[[Kiang]], a kiosk/? system built into a tabletop with a touchscreen</del>
* <del>[[Janky]], a janky system, made from whatever was available.</del>
* <del>[[Horsy]], where the audiovisual stuff lives</del>

=== Physical Infrastructure ===
* [[Network]]
* [[Touch_Panels|Touch Panels]]
* [[Telephony|Voice over IP / Telephony]]
* [[Electrical_Map|Electrical Map]]
* [[Elevator]]
* [[Plumbing]]
* [[AV]]

=== Access Control ===
* [[Door Keys]]
* [[Access System|Electronic door lock]]
* [[Noisedoor]]

=== Bulk Orders ===
* [[Digikey Bulk Order|Digikey Bulk Order]]
* [[McMaster Bulk Order|McMaster Bulk Order]]
* [[Mega Arduino Order|Mega Arduino Order]]
* [[Adafruit Bulk Order]]

=== Facilities ===

* [[House Keeping]]
* [[2169 Utilities]]

=== Sources for project components ===
* [[Sources for electronic and other project components|External resources]]

[[Category:InTheSpace]]

Wood Shop

2017-05-02T19:06:22Z

Urriellu:

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.
[[File:Shop.jpg|thumb|right|Lathe, drill press and others]]

A wish-list for the shop is posted on [[Dirty Shop Wish List]]
==Tools==

* [[Table Saw]] (Black & Decker BT2500)
* [[Lathe]] (7"x12" Cummins)
** Check http://www.mini-lathe.com/ for great info
* [[Manual_Mill | Manual Mill]] (JET JET-15 Mill / Drill)
* [[MaxNCMill | CNC Mill (MaxNC 10)]]
* [[Roland_MDX-40a | CNC Mill (Roland MDX-40a)]]
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
* [[Bench grinder]] (Ryobi 6")
* [[Disk sander]] (Delta 31-120 12")
* [[Drill press]] (Ryobi RDP1850)
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
* Assorted hand tools
** Hacksaws
** Drill
** [[Heat gun]]
* Assorted screws, bolts, etc

==Other Noisebridge Tools==
* [[Lasercutter | Laser cutter]]
* [[3D printers]]

==Safety==

'''A note regarding cutting metal in stationary tools:'''

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Wood Shop

2017-05-02T19:04:33Z

Urriellu:

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.
[[File:Shop.jpg|thumb|right|Lathe, drill press and others]]

A wish-list for the shop is posted on [[Dirty Shop Wish List]]
==Tools==

* [[Table Saw]] (Black & Decker BT2500)
* [[Manual_Mill | Manual Mill]] (JET JET-15 Mill / Drill)
* [[Lathe]] (7"x12" Cummins)
** Check http://www.mini-lathe.com/ for great info
* [[MaxNCMill | CNC Mill (MaxNC 10)]]
* [[Roland_MDX-40a | CNC Mill (Roland MDX-40a)]]
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
* [[Bench grinder]] (Ryobi 6")
* [[Disk sander]] (Delta 31-120 12")
* [[Drill press]] (Ryobi RDP1850)
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
* Assorted hand tools
** Hacksaws
** Drill
** [[Heat gun]]
* Assorted screws, bolts, etc

==Other Noisebridge Tools==
* [[Lasercutter | Laser cutter]]
* [[3D printers]]

==Safety==

'''A note regarding cutting metal in stationary tools:'''

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Roland MDX-40a

2017-05-02T19:03:23Z

Urriellu: Created page with "==Features== * Maximum cuttable material ** 123mm = 4.84in high ** 305x305mm = 12x12in wide ** 4kg = 8.8lb * Operating speed ** XY-axis : 7 to 3000 mm/min. (0.28 to 118 in./m)..."

==Features==
* Maximum cuttable material
** 123mm = 4.84in high
** 305x305mm = 12x12in wide
** 4kg = 8.8lb
* Operating speed
** XY-axis : 7 to 3000 mm/min. (0.28 to 118 in./m)
** Z-axis : 7 to 1800 mm/min. (0.28 to 70.8 in./m)
** 2 mm/min step for 7 to 60 mm/min(0.28 to 2.36 in./m)
** 60 mm/min step for 60 to 3000 mm/min(2.36 to 118 in./m).
* Software resolution
** 0.01 mm/step (0.00039 in./step) (RML-1),
** 0.001 mm/step (0.000039 in./step) (NC code)
* Mechanical resolution
** 0.002 mm/step (0.000078 in./step) (micro-step control)
* Spindle rotation
** 4,500 to 15,000 rpm
* Control command sets
** RML-1
** NC code
* Power consumption
** Approx. 210 W
* External dimensions
** Width x depth x height : 669 x 760 x 554 mm (26.4 x 30 x 21.9 in.)
* Weight
** 65 kg

==Base==
* Dimensions: 305x305x10mm
** See [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf User’s Manual page 93]

==Collets==
* <del>3mm, ZC-23-3 $39.99</del> (we don’t have it)
* ⅛” (3.175mm) ZC-23-3175 PNC-2300A $39.99
* ~15/64” = 3.75/16” (6mm) ZC-23-6 $39.99
* ¼” (6.35mm) ZC-23-635 $35.99

==Mill bits==
* Shanks available:
** ⅛” (3.175mm)
** ~15/64” = 3.75/16” (6mm)
** ¼” (6.35mm)
* Mill bit ⅛” flat
* Mill bit ⅛” round
* Mill bit ¼” flat
* Mill bit ¼” round

==Spanners==
* 10mm
* 17mm

==Hex allen keys==
* 2mm

==Materials==
===Allowed===
* Soft woods
* (maybe?) hard woods
* Resins
===Forbidden===
* ANY METAL IS FORBIDDEN
* Aluminum
* Steel

==Cutting settings per mill and material==
* Horizontal speed
** [http://www.cgctool.com/calculator Calculator]
* Vertical speed
* Cutting depth

==Links==
* [https://www.rolanddga.com/products/3d/mdx-40a-benchtop-cnc-mill/accessories Roland MDX-40a Accessories]
* [http://support.rolanddga.com/docs/documents/departments/technical%20services/manuals%20and%20guides/mdx-40a_use_en_r1.pdf Roland MDX-40a User’s Manual]