SUPERCON

2017-11-12T01:23:58Z

24.176.218.6: cell hello

= 2017 =

== Badge Hacking ==

Hackaday IO Project page:
https://hackaday.io/project/27427-camera-badge-for-supercon-2017

=== Lithium Conversion ===

According to Mike the regulator circuit will handle up to <code>5V</code> input and a couple hundred milliamp current.

Optionally remove/de-solder battery holders, or just remove batteries.

Connect lithium battery to <code>0V</code> and <code>VBAT</code>, there are several <code>0V</code> connections exposed on the board. There is one <code>VBAT</code> on unpopulated header on the lower part of the board. I added a 2x6 female header, and soldered a solid where to a the lithium battery + lead and used that as a jumper so the battery could easily be disconnected as well.

TODO: Add header for charging battery.

=== Easter Eggs ===

[[File:Badge-Comic.jpg|1000px]]

[[File:Badge-Nothing.jpg|1000px]]

=== Firmware ===

==== IDE & Compiler ====
Linux

*http://www.microchip.com/mplabx-ide-linux-installer
*http://www.microchip.com/mplabxc32linux

All platforms

*http://www.microchip.com/mplab/mplab-x-ide
*http://www.microchip.com/mplab/compilers

== Cellular Hacking ==

Trinket M0 running CircuitPython with a SIM800 2G cell module and hologram SIM.

<pre>
### MODEM CONFIGURE #############################
CMD (~3 seconds) AT

CMD (~5 seconds) AT+IPR=19200

CMD (~5 seconds) AT+CPIN?

CMD (~10 seconds) AT+CMGF=1

### MODEM CONFIGURE SUCCESSFUL ###
### NETWORK CONNECT #############################
CMD (~65 seconds) AT+CIPSHUT

CMD (~10 seconds) AT+CGATT?

CMD (~2 seconds) AT+CIPMUX=1

CMD (~2 seconds) AT+CSTT="hologram"

CMD (~85 seconds) AT+CIICR

CMD (~2 seconds) AT+CIFSR

### NETWORK CONNECT SUCCESSFUL ###
### SEND MESSAGE ################################
CMD (~75 seconds) AT+CIPSTART=1,"TCP","23.253.146.203","9999"

CMD (~5 seconds) AT+CIPSEND=1,43

CMD (~60 seconds) {"k": "********", "d": "Yay, We did it!"}

### SEND MESSAGE SUCCESSFUL ###
CMD (~4 seconds) AT+CIPCLOSE=1

Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.

Press any key to enter the REPL. Use CTRL-D to reload.
</pre>

Message in hologram dashboard log <code>Yay, We did it!</code>

= 2016 =

 
noisebridge.net/SUPERCON
 
hackaday
 
샞
 

[EXPERIMENTAL]
 
If you are on-site at supercon and connected to WiFi or ethernet you can hit teh following
 
<s>http://192.168.7.35</s>
 
<s>http://192.168.7.35:9999/index</s>

 

== badge h4x0r'n ==
pro tip, hold teh left and right buttons, and press up/down buttons to adjust LED brightness

=== firmware ===

#Open the link: https://mplabxpress.microchip.com/mplabcloud/Example/Details/259#
#Write some code
#Press the button with a down arrow and chip icon "Make and Program Device", this will build the new firmware and download a .hex file.
#Connect your badge with a USB cable
#Hold down teh "ON" button, press the "RESET" button, release the "ON" button
#Copy the .hex file to the badge, which shows up like a usb stick
#Unplug the USB cable
#Play with your new version of firmware

=== crypto.hac.io ===
Hints, of a sort, include Mastermind, Morse, electronics, history, and geography, and more.

==== 1 ====
'''Mastermind Challenge'''

think binary eh?

==== 2 ====
'''Morse Code Challenge'''

.... --- .-- -- .- -. -.-- -... .. - ... .. -. .- --. .. --. .- -... -.-- - .

HOW MANY BITS IN A GIGABYTE

There's an app for that "Morse Encoder Decoder" by Tsai Chieh-Ping

==== 3 ====
'''GO as in GO Game? Challenge'''

==== 4 ====
'''? Challenge'''

==== 5 ====
'''? Challenge'''

0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

== mousepad ==
Hackerspace in a vbox

ask a h4x0r for mousepad-cyan, please have a usb stick or SD card with a few gig's free.

== nubcore ==
Temperature/Humidity 
[[File:nubDHT.jpg|800px]]
 
 
Volts
 
[[File:nubVolt.jpg|800px]]
 
Concept Development
 
[[File:NubVoltRender.jpg|800px]]

== more ==
add things here...

SUPERCON

2016-11-05T21:22:45Z

24.176.218.6: red herring's

hackaday
 
샞
 
== badge h4x0r'n ==
 
0x34A5B2
<=herring=x
 
*https://hackaday.com/2016/11/03/the-hacks-and-puzzles-of-the-hackaday-supercon-badge/#more-229804
*http://hackaday.com/2016/11/04/the-fastest-path-to-supercon-badge-firmware-hacking/
*https://hackaday.io/project/17953-superconference-challenge
*https://en.wikipedia.org/wiki/Mastermind_(board_game)
*https://en.wikipedia.org/wiki/Morse_code
*https://www.microchip.com/mplab/mplab-xpress

Noisebridge - User contributions [en]

SUPERCON

SUPERCON