https://wiki.extremist.software/api.php?action=feedcontributions&feedformat=atom&user=208.54.5.237Noisebridge - User contributions [en]2026-04-07T03:22:19ZUser contributionsMediaWiki 1.39.13https://wiki.extremist.software/index.php?title=Doorbell&diff=33456Doorbell2013-08-05T00:19:58Z<p>208.54.5.237: /* Doorbell 2.0 */</p>
<hr />
<div><br />
<br />
== Doorbell 2.0 ==<br />
<br />
Arduino-based, includes lights and a customizable tone.<br />
<br />
To do: mount in a stable enclosure.<br />
<br />
Troubleshooting<br />
<br />
* Check that the speaker is connected to the green terminals of the arduino, and an audio cable is plugged into the intercom box by the top door.<br />
* Hit the reset key on the Arduino<br />
* Ring the door bell. Does it work?<br />
* Re-upload or modify the Arduino sketch<br />
<br />
If this fails you can revert to doorbell 1.0.<br />
<br />
Want to improve the doorbell? Change the chime? Here is [https://github.com/danasf/noise-/tree/master/doorbell arduino code].<br />
<br />
You'll need a USB mini cable to connect. The board is a [http://www.freetronics.com/products/etherten Freetronics Etherten], but choose Uno in the Arduino IDE. <br />
<br />
Improvements & ability to alter light and sound patterns via ethernet will be coming soon.<br />
<br />
== Doorbell 1.0 ==<br />
<br />
Via original intercom box.<br />
<br />
Fallback instructions.<br />
<br />
Go to the intercom box by the top door:<br />
<br />
* Ensure the buzzer switch on the top is set to 'On'<br />
* Unplug the audio cable from the side of the intercom box by the door.<br />
Doorbell 1.0 functionality should work</div>208.54.5.237